Posts Tagged ‘Range report’

Range Report: Shooting minute of Elk

September 30, 2010

Today was sight in day at our local range, and, I just happened to have put together some Elk fodder for the Marlin XL7. Now, 270 Winchesters are known for fine accurate and for being pretty picky when it comes to what you feed them. The brand doesn’t seem to matter, you just have to hunt for the right load combination and or factory ammunition. Which can get pretty expensive.

To add to the confusion, brands that you think would match up sometimes don’t really function all that well. I’ve owned several Remington rifles, and, for an example; none of them shot Remington ammunition worth a hoot! They all shot extremely well using Federal products though.

My Marlin has been not to kind to Nosler bullets, which I happen to really like. But Sierra? They all seem to shoot like a dream. Since I don’t have a lot of time to work up an Elk load, I popped open the Sierra loading manual, and had a go at it. Please note that what follows is safe in my rifle, but may not be in yours. Work up loads cautiously, and never exceed maximum loads. Also, this was not really a reloading situation, as this was new unfired Remington brass.

Components are as follows. Brass, as noted above, was new unfired Remington, fully prepped including deburring the flash holes, and sizing the primer pockets. Cases were full length sized using an RCBS X-Die.

Primers were Federal Large Rifle, and the chosen bullet was the Sierra GameKing 150 grain. Cartridge overall length was set at 3.316 inches, and the powder used was Reloader 22.

My particular rifle has a history of shooting better with the hotter loads, but I also had not tried any 150 grain bullets in it yet, so I stuck with the book recommendations. The best accuracy load was listed at 53.7 grains of powder, with the hunting load at 55.2 grains. I used Remington Core-Lokt 150 grain ammunition as a control.

The range was pretty crowded with people waiting for a shooting station, so this had to be brief. Allowing the barrel to completely cool just was not possible.

Range, 100 yards for all loads, with the temperature in the upper 70’s and the humidity was right around 50 percent according to The Weather Channel. Winds were variable, but nothing really serious, maybe an occasional gust at 10 mph. All shots were from a bench using rests, and I had the luxury of a spotter this day. 🙂

Control group: 5 rounds of Remington Core-Lokt 150 grain. After a fouling round had been shot. 1.5 inches.

The lighter Accuracy recommended load of 53.7 grains of R 22 powder came in at just under 1 inch. 🙂

The heavier charge , same bullet and powder. Came in at 1/2 inch! I am sighted three inches high at one hundred yards, and should be able to shoot using no adjustment out to 250 yards.

That friends, is minute of Elk, and then some!

Range report: Marlin XL7 270 Winchester Stalkingbear Arms Semi Custom

February 8, 2010

MARLIN XL 7

270 WINCHESTER

RANGE REPORT

It is not all that often that I write about personal things but on this I simply had too.

Some time ago three things all coincided that in nearly an instant transformed me into a person that I had never before been in my entire adult life. Gun poor! Those things were pretty much well beyond my control but that is not what this is about. Neil Stalkingbear, whom I call “Brother Bear” was not happy when I told him about all that had happened. Right after that he himself faced a life threatening illness, and recovered thank almighty God. I had posted at Hunters Central at Yahoo Groups about Marlin Rifles a few times, and, Bear being the man that he is asked one evening if I would like a Marlin Rifle. Since younger people sometimes read here let’s just say that my reply was in the affirmative.

Now, anyone that knows Neil at all knows that he just has to, shall we say tinker? It doesn’t matter, cars, trucks, stills, I mean guns…! So, basically, I received a Stalkingbear Arms©® worked over Marlin XL7 in Winchester 270 topped off with a Nikon Pro Staff Scope. Neil had did a traditional job on the barrel and action, hand lapping it to, a level that I had not seen on a rifle since I’d spent nearly a thousand dollars on my model 700 280! He also worked his magic on the trigger, and yes, I went to a couple of stores and tested the triggers, all of which were very good, on several XL7’s. Neil’s was far superior. It’s is light, crisp, and now I don’t even remember that thing called “creep.” No, it isn’t a smooth as a newborns bottom. It is smoother! I guess you just can’t have everything…

Like everyone, I have had to deal  with the shortage of ammunition brought on by the “Gun Salesman of the Year” / “Ammunition Salesman of the year” and getting any fodder at all was just about impossible… (See Conservative Libertarian Outpost about that!) But, one day while up in Sheridan while shopping at Shipton’s Big R store, it happened! They got in a boatload of ammunition! Yes, they restricted my purchase, but, with my better half along we were able to purchase four boxes of Federal 270 Winchester ammunition, 130 grain Power Shok® to be exact. No, it’s not the best that they make, or what might be available, but it was there! Not to mention that it is outstanding ammunition for our local Deer and Pronghorns!

Now back to the rifle. Bear had told me that I would have to clean the heck out of it, and yes I did. It got a rather thorough scrubbing, and was re-lubricated using first Break Free, then, after letting that dry and set, a general wash or Rem Oil© I then rubbed up all that with a gun cloth and loaded it to check the functioning… SQUAK! Then I remembered that Bear said that it liked grease. After lubing that bolt up with Montana Gun Grease® it was quiet as a lamb with a Cougar nearby.

The shipping necessitated that the scope be sent separate from the rifle so I set about that chore and all that that entails. I should have left it alone… My BSA calumniator had me more than two feet off, but, we will get to that! The effects of global warming had me cooped up for weeks, or so the Climate gate people say. In any case once the snow drifts had subsided it was off to the range!

I set up at the one hundred yard shooting station. Took a rest, put three downrange, and..? I was not pleased, not at all. I sent three more, same results. I moved to the fifty yard range.

It took some serious twisting of knobs but I finally made paper. I then did the single shot sight in maneuver, and put three right on top of each other after that. Back to a hundred yards.

I sent three, and then tweaked the scopes knobs. It looked good through a fellow’s spotting scope after that. So, we all went down and put up new targets. Right about then some guy got a bit lippy, and said something along the lines of not bad for junk… he kept it up, and we got back to the firing line. I got a tad bit upset, after all, it is not good to diss another mans firearm. Mind ya’ now, he is a good shot, kept them all in the black, and fairly tight too. He was shooting a rather nice rifle, it looked to be a custom model 70 topped with Swarovski glass at that. He sent five down range, an X two sevens, and two nines, not bad, not bad at all. The he looked at me and asked if I was going to shoot, my piece of trash… Note: he had shot from the bench. I got hot, after all Bear had put in some serious time on that rifle.

I stood up, slung up, and put five downrange, three in the X, two nines… I looked at him and asked, let’s do five more. For the rifles! He gathered up his things, and left.

I’d sure love to own a rifle like his. Oh well… I can’t wait to see what I can squeeze out of this Marlin with some worked up loads!

The picture of the target is posted at Hunters Central at Yahoo Groups. It may be the best that I have ever shot in my life.

Credit goes to Neil Stalkingbear.Arms@yahoo.com


%d bloggers like this: